从下述关于模块化程序的叙述中,选出5条正确的叙述。()A.使程序设计更为方便,但比较难维护。B.
从下述关于模块化程序的叙述中,选出5条正确的叙述。()
A.使程序设计更为方便,但比较难维护。
B.便于由多人分工编制大型程序。
C.便于软件功能扩充。
D.在内存能够容纳的前提下,应使模块尽可能大,以减少模块的个数。
E.模块之间的接口叫数据文件。
从下述关于模块化程序的叙述中,选出5条正确的叙述。()
A.使程序设计更为方便,但比较难维护。
B.便于由多人分工编制大型程序。
C.便于软件功能扩充。
D.在内存能够容纳的前提下,应使模块尽可能大,以减少模块的个数。
E.模块之间的接口叫数据文件。
第1题
从下述关于联机命令接口的不同论述中,选出一条正确的论述。 (1)
A.联机命令接口,是用户程序与OS之间的接口,因此它不是命令接口
B.联机命令接口包括键盘和屏幕两部分
C.联机命令接口包括一组键盘命令、终端处理程序及命令解释程序三个部分
D.联机命令接口是用户程序
第2题
从下列英语叙述中,选出5条正确的叙述。
1.When the electricity is switched off, the ROM is cleared ofits contents, the RAM is not.
2.IF-THEN-ELSE structures in a programming language provide selection.
3.A program in its original form is known as an object program, and the translated version is known as a source program.
4.The CPU is the most important piece of hardware in the entire system and yet one of the simplest.
5.The lowercase letters come after the uppercase letters in the ASCII table.
6.Queue insertions and deletions are made at the same end ofthe queue.
7.Improvements in software quality are necessary to reduce program maintenance costs.
8.A recursive procedure is one that activates itself during its activations.
9.A floppy diskette machine is an example of a direct access storage device.
10.Comments specify actions for a computer to perform when a program is run.
第3题
从下列英语叙述中,选出5条正确的叙述,把编号依次写在下面。
(1) The language translator converts the symbolic program into source program.
(2) The coded program written by a programmer is called an object program.
(3) COBOL is self-documenting unlike many technical language.
(4) FORTRAN has high capabilities for performing input/output operations and in handling nonnumeric data.
(5) Loading is a process through which the information on the diskettes or tapes is read by the input unit and stored in the proper memory location.
(6) The assemble program executes source codes directly by determining the meaning of each statement as it is encounted.
(7) Magnetic tape uses cylinders for finding data.
(8) Hexadecimal is used as a shorthand for the internal codes.
(9) Another name of diskette is floppy disk.
(10) An IF-THEN-ELSE selection technique can never be part of a loop.
(11) The most popular language for scientific computing is FORTRAN.
(12) It is much easier to access data in a file than in a database.
第5题
以下叙述中正确的是
A.程序的主函数名除main外,也可以使用Main或main
B.在C程序中,模块化主要是通过函数来实现的
C.程序可以包含多个主函数,但总是从第一个主函数处开始执行
D.书写源程序时,必须注意缩进格式,否则程序会有编译错误
第7题
以下选项中关于程序模块化的叙述错误的是
A.把程序分成若干相对独立、功能单一的模块,可便于重复使用这些模块
B.可采用自底向上、逐步细化的设计方法把若干独立模块组装成所要求的程序
C.把程序分成若干相对独立的模块,可便于编码和调试
D.可采用自顶向下、逐步细化的设计方法把若干独立模块组装成所要求的程序
第8题
以下关于结构化程序设计的叙述中正确的是
A.结构化程序使用goto语句会很便捷
B.一个结构化程序必须同时由顺序、分支、循环三种结构组成
C.由三种基本结构构成的程序只能解决小规模的问题
D.在C语言中,程序的模块化是利用函数实现的
第10题
从下面关于操作系统的叙述中,选出正确的叙述______。
A) 操作系统是一种系统软件
B) 操作系统的作用是使用户能按菜单操作
C) 操作系统是计算机硬件的一个组成部分
D) 操作系统是数据库管理系统的子系统
E) 操作系统可分为批处理、分时处理、实时处理等类型
F) 操作系统的作用是控制和管理计算机资源,合理组织工作流程,方便用户使用
G) DOS、WS、FOXPRO都是微机上用的操作系统
H) 操作系统是对硬件的第一层扩充,应用软件是在操作系统支持下工作的